Friedrich UE12D33D Manual descargar pdf (Pagina 13)

—13—

2.3.4 POWER CORD

1. Remove the control box. (Refer to section 2.1.3)

2. Unfold the control box. (Refer to section 2.3.3)

3. Disconnect the grounding screw from the Base

pan.

4. Disconnect 2 receptacles.

5. Remove a screw which fastens the clip cord.

6. Pull the power cord. (See Fig. 13)

7. Re-install the components by referring to the

removal procedure, above.

(Use only one ground-marked hole, , for ground

connection.)

8. If the supply cord of this appliance is damaged, it

must be replaced with the factory-authorized and

specified cord.

2.3.5 ELECTRONIC CONTROL BOARD

1. Remove the control box. (Refer to section 2.1.3)

2. Unfold the control box. (Refer to section 2.3.3)

3. Disconnect all the leads of Electronic control board

terminals.

4. Remove the Electronic control board. (See Fig. 14)

5. Re-install the components by referring to the

removal procedures, above.

Figure 13

Figure 14

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Sin comentarios

Friedrich UE12D33D Manual Pagina 13